HC4D Plus Multilayer Zirconia Blank – 5Gradient Multilayer HC4D Plus Multilayer Zirconia Blank is our new and hot sales multilayer. It has Five layer, each layer has the different translucency and strength. Detail as below:
It has wide indication. HC4D Plus Multilayer Zirconia Blank has very balanced strength and translucent. All cases you only need one blank.
2 to 6 units bridge and more than 7 units bridge ( Only one pontic)
Features:
translucency from 43% to 55%
A multilayer color gradient
High strength to support all bridge, strength from 700MPA to 1200MPA
High fracture toughness to resist chipping
Shaded :Vita16shades+BL1/BL2/BL3/BL4
Available thickness between 10 to 30mm, size OD98/OD95/AG92
100% compatible well with all open CADCAM system
Dry pressing and Cold Isostatic pressed, lifetime warrant
Chemical composition
Components
HC4D-ML
ZrO2+HfO2
86.3% ~ 94.2%
Y2O3
5.8% ~ 9.7%
Er2O3
＜2%
Fe2O3
＜0.5%
Al2O3
＜0.5%
Other Oxides
＜0.5%
Note : you are using the system Zirkonzahn and Amann Girrbach system. We can provide the compatible size for your system. Please contact us : info@honchon.com Instruction and sintering temperature, please reference instruction of HC4D ML, please download at our site.
You Might Also Like
Download
DIVERSITY OF EXPLORATION
1. Wireless Freedom with Wi-Fi 6
Move freely around the patient without being restricted by a scanner cable. Wi-Fi 6 connectivity supports wireless data transmission over distances of up to 20 meters under suitable conditions, providing greater flexibility for daily clinical workflows.
2. Fast Full-Arch Scanning
Capture a full dental arch in as little as 10 seconds under suitable scanning conditions. The HCE-IS-500 helps dental professionals acquire digital impressions efficiently and move smoothly to the next stage of the digital workflow.Actual scanning time may vary depending on the clinical case, scanning technique, and operating conditions.
3. Dual-Battery Design for Continuous Workflow
The HCE-IS-500 includes two removable batteries, each supporting extended operation. Swap batteries when needed to reduce downtime and maintain a smoother scanning workflow.
4. AI-Assisted Scanning for Cleaner Data
Intelligent scanning algorithms help identify and filter unwanted soft-tissue data, such as interference from the tongue and oral mucosa. This supports cleaner 3D models and may reduce the need for manual data cleanup.
